View SKY73033-11-09_9020656.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

skyworks solutions, inc. ? phone [781] 376-3000 ? fax [781] 376-3100 ? sales@skyworksinc.com ? www.skyworksinc.com 200635d ? skyworks proprietary information ? products and product information are subject to change without notice ? sep tember 30, 2009 1 data sheet sky73033-11: 1700 C 2200 mhz high gain and linearity single downconversion mixer for 2g/3g base station applications applications x 2g/3g base station transceivers: gsm/edge, cdma, umts/wcdma x land mobile radio x wireless local loop x high performance radio links x private mobile radio features x operating frequency range: 1700 to 2200 mhz x if frequency range: 40 to 300 mhz x conversion gain: 8.9 db x input ip3: 24.0 dbm x output ip3: 32.9 dbm x noise figure: 9.4 db x integrated lo drivers x integrated low loss rf baluns x high linearity if amplifiers x on-chip spdt lo switch (greater than 40 db lo-to-lo isolation) x small, mcm (20-pin, 5 x 5 mm) package (msl3, 260 q c per jedec j-std-020) skyworks offers lead (pb)-free rohs (restriction of hazardous substances) compliant packaging. description the sky73033-11 is a fully integrated single mixer that includes local oscillator (lo) drivers, an lo switch, high linearity mixers, and large dynamic range intermediate frequency (if) amplifiers. low loss rf baluns have also been included to reduce design complications and lower system cost. the sky73033-11 features an input ip3 of 24.0 dbm and a noise figure (nf) of 9.4 db, making the device an ideal solution for high dynamic range systems such as 2g/3g base station receivers. the lo switch provides more than 40 db of isolation between lo inputs and supports the switching time required for gsm/edge base stations. the sky73033-11 is manufactured using a robust silicon bicmos process and has been designed for optimum long-term reliability. the sky73033-11 single downconversion mixer is provided in a compact, 20-pin 5 x 5 mm multi-chip module (mcm). a functional block diagram is shown in figure 1. the pin configuration and package are shown in figure 2. signal pin assignments and functional pin descriptions are provided in table 1. s937 rf lo1 vcc_lo lo2 lo_sel ifa+ rxif ifaC vcc_ifrf figure 1. sky73033-11 block diagram
data sheet ? sky73033-11 downconversion mixer skyworks solutions, inc. ? phone [781] 376-3000 ? fax [781] 376-3100 ? sales@skyworksinc.com ? www.skyworksinc.com 2 september 30, 2009 ? skyworks proprietary information ? products and product information are subject to change without no tice ? 200635d s938 v cc_ifrf rf n/c gnd gnd vcc_lo n/c vcc_losw lo_sel gnd 15 14 13 12 11 lo2 n/c gnd gnd lo1 1 2 3 4 5 67 8910 rxif if+ ifC gnd n/c 20 19 18 17 16 figure 2. sky73033-11 pinout C 20-pin mcm table 1. sky73033-11 signal descriptions pin # name description pin # name description 1 vcc_ifrf if and rf dc supply, +5v 11 lo1 lo1 input 2 rf rf input 12 gnd ground 3 n/c no connection 13 gnd ground 4 gnd ground 14 n/c no connection 5 gnd ground 15 lo2 lo2 input 6 vcc_lo lo dc supply, +5v 16 n/c no connection 7 n/c no connection 17 gnd ground 8 vcc_losw lo switch dc supply, +5v 18 ifC negative if output 9 lo_sel lo select switch control 19 if+ positive if output 10 gnd ground 20 rxif if bias adjust
data sheet ? sky73033-11 downconversion mixer skyworks solutions, inc. ? phone [781] 376-3000 ? fax [781] 376-3100 ? sales@skyworksinc.com ? www.skyworksinc.com 200635d ? skyworks proprietary information ? products and product information are subject to change without notice ? sep tember 30, 2009 3 functional description the sky73033-11 is a high gain single mixer, optimized for base station receiver applications. the device consists of a low loss rf balun, high linearity passive mixer, and a low noise if amplifier. an lo amplifier is also included that allow the sky73033-11 to connect directly to the output of a voltage controlled oscillator (vco). this eliminates the extra gain stages needed by most discrete passive mixers. a single pole, double throw (spdt) switch has been included to select between two different lo inputs (lo1 and lo2) for frequency hopping applications such as gsm. rf baluns and passive mixer the rf baluns provide a single ended input, which can easily be matched to 50 : using a simple external matching circuit. the rf baluns offer very low loss, and excellent amplitude and phase balance. the high linearity sky73033-11 is a passive, double balanced mixer that provides a very low conversion loss, and excellent 3 rd order input insertion point (iip3). addtionally, the balanced nature of the mixer provides for high port-to-port isolation. lo buffers and spdt lo switch the lo buffers allow the input power of the sky73033-11 to be in the range of r 6 dbm. the lo section is optimized for low-side lo injection. however, each of the two los can be driven over a wide frequency range with only slight degradation in performance. a high isolation spdt switch allows the sky73033-11 to be used for frequency hopping applications. this switch provides greater than 40 db of lo1 to lo2 isolation: lo_sel input lo path selected high lo1 (pin 11) enabled low lo2 (pin 15) enabled for applications that do not require frequency hopping, lo_sel is fixed to one state and the appropriate lo input is used. an internal pull-down resistor enables the lo2 input. if amplifier the sky73033-11 includes high dynamic range if amplifiers that follow the passive mixers in the signal path. the outputs require a supply voltage connection using inductive chokes. these choke inductors should be high-q and have the ability to handle 200 ma or greater. a simple matching network allows the output ports to be matched to a balanced 200 : impedance. the if amplifiers are optimized for if frequencies between 40 and 300 mhz. the if amplifiers can be operated outside of this range, but with a slight degradation in performance. electrical and mechanical specifications the absolute maximum ratings of the sky73033-11 are provided in table 2 and the recommended operating conditions in table 3. electrical characteristics for the sky73033-11 are provided in table 4. typical performance characteristics of the sky73033-11 are illustrated in figures 3 through 20.
data sheet ? sky73033-11 downconversion mixer skyworks solutions, inc. ? phone [781] 376-3000 ? fax [781] 376-3100 ? sales@skyworksinc.com ? www.skyworksinc.com 4 september 30, 2009 ? skyworks proprietary information ? products and product information are subject to change without no tice ? 200635d table 2. sky73033-11 absolute maximum ratings (note 1) parameter symbol minimum maximum units supply voltage, +5 v vcc 4.5 5.5 v supply current i cc 240 ma rf input power p rf +20.0 dbm lo input power p lo +20.0 dbm operating case temperature t c C40 +85 q c junction temperature (note 2) t j +150 q c storage case temperature t stg C40 +125 q c note 1: exposure to maximum rating conditions for extended periods m ay reduce device reliability. there is no damage to device with on ly one parameter set at the limit and all other parameters set at or below their nominal value. exceeding any of the limits listed here may result in permanent damage to the d evice. note 2 : nominal thermal resistance (junction to center ground pad) is 5.1 q c/w. caution : although this device is designed to be as robust as possible, electrostatic discharge (esd) can damage this device. this devi ce must be protected at all times from esd. static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. industry-standard esd precautions should be used at all times. table 3. sky73033-11 recommended operating conditions parameter symbol minimum typical maximum units supply voltage, +5 v vcc 4.75 5.00 5.25 v supply current i cc 200 ma lo input power p lo C6 0 +6 dbm lo select input: high low lo_sel h lo_sel l 2.2 0.8 v v operating case temperature t c C40 +85 q c rf frequency range f rf 1700 2200 mhz lo frequency range (note 1) f lo 1460 2000 mhz if frequency range f if 40 300 mhz note 1 : the sky73033-11 has been optimized for low side lo injection. however, the lo can be used outside of the specified frequency range with degraded performance. table 4. sky73033-11 electrical specifications (note 1) (1 of 2) (voltage supply = +5 v, t c = +25 q c, lo = 0 dbm, rf frequency = 1748 mhz, if frequency = 201 mhz, lo frequency = 1547 mhz, unless otherwise noted) parameter symbol test condition min typical max units conversion gain g f rf = 1710 to 1980 mhz, vcc = 4.75 to 5.25 v, p lo = C3 to +3 dbm 7.5 8.9 db gain variation over temperature t c = C40 to +85 c r 0.8 db noise figure nf 9.4 db noise figure with a blocker signal nf blk blocking signal input power = +8 dbm 23 db third order input int ercept point iip3 f rf = 1748 and 1748.8 mhz , p rf = C10 dbm/each tone, vcc = 4.75 to 5.25 v, p lo = C3 to +3 dbm 22.5 24.0 dbm
data sheet ? sky73033-11 downconversion mixer skyworks solutions, inc. ? phone [781] 376-3000 ? fax [781] 376-3100 ? sales@skyworksinc.com ? www.skyworksinc.com 200635d ? skyworks proprietary information ? products and product information are subject to change without notice ? sep tember 30, 2009 5 table 4. sky73033-11 electrical specifications (note 1) (2 of 2) (voltage supply = +5 v, t c = +25 q c, lo = 0 dbm, rf frequency = 1748 mhz, if frequency = 201 mhz, lo frequency = 1547 mhz, unless otherwise noted) parameter symbol test condition min typical max units input ip3 variation over temperature f rf = 1748 and 1748.8 mhz , t c = C40 to +85 c r 0.2 db third order output intercept point oip3 f rf = 1748 and 1748.8 mhz , p rf = C10 dbm/each tone, vcc = 4.75 to 5.25 v, p lo = C3 to +3 dbm 32.9 dbm 2rf C 2lo 2x2 p rf = C10 dbm C71 C63 dbc 3rf C 3lo 3x3 p rf = C10 dbm C80 C70 dbc input 1 db compression point ip1db f rf = 1710 to 1980 mhz, vcc = 4.75 to 5.25 v, p lo = C3 to +3 dbm 11.5 13.5 dbm output 1 db compression point op1db 21.4 dbm lo1-to-lo2 isolation 40 db rf to if isolation 45 55 db lo leakage: @ rf port @ if port C37 C56 C28 C33 dbm dbm lo_sel input C20 150 250 p a lo switching time 1.0 p s rf port input return loss z in _ rf with external matching components 14 db lo port input return loss z in _ lo with external matching components 14 db if port input return loss z out _ if with external matching components 14 db note 1: performance is guaranteed only under the conditions listed in this table and is not guaranteed over the full operating or stor age temperature ranges. exceeding any of the conditions listed here may result in permanent damage to the device. operation at elevated temperatures may reduce reliability of the devi ce.
data sheet ? sky73033-11 downconversion mixer skyworks solutions, inc. ? phone [781] 376-3000 ? fax [781] 376-3100 ? sales@skyworksinc.com ? www.skyworksinc.com 6 september 30, 2009 ? skyworks proprietary information ? products and product information are subject to change without no tice ? 200635d typical performance characteristics 9.0 9.5 10.0 11.0 8.5 8.0 7.5 7.0 10.5 11.5 12.0 1710 1740 1770 1800 1830 1860 1890 1920 1950 1980 rf frequency (mhz) gain (db) 4.75 v 5.00 v 5.25 v figure 3. mixer gain vs frequency and supply voltage 9.0 9.5 10.0 11.0 8.5 8.0 7.5 7.0 10.5 11.5 12.0 1710 1740 1770 1800 1830 1860 1890 1920 1950 1980 rf frequency (mhz) gain (db) C3 dbm 0 dbm +3 dbm figure 5. mixer gain vs frequency and lo power 24 25 26 28 23 22 21 20 27 29 30 1710 1735 1760 1785 1810 1835 1860 1885 1910 rf frequency (mhz) iip3 (dbm) 4.75 v 5.00 v 5.25 v figure 7. 1800 mhz and 1900 mhz mixer iip3 vs frequency and supply voltage 9.0 9.5 10.0 11.0 8.5 8.0 7.5 7.0 10.5 11.5 12.0 1710 1740 1770 1800 1830 1860 1890 1920 1950 1980 rf frequency (mhz) gain (db) C40 o c +25 o c +85 o c figure 4. mixer gain vs frequency and temperature 9 10 11 13 8 7 6 5 12 14 15 1710 1740 1770 1800 1830 1860 1890 1920 1950 19 rf frequency (mhz) noise figure (db) figure 6. mixer noise figure vs frequency 24 25 26 28 23 22 21 20 27 29 30 1710 1735 1760 1785 1810 1835 1860 1885 1910 rf frequency (mhz) iip3 (dbm) C40 o c +25 o c +85 o c figure 8. 1800 mhz and 1900 mhz mixer iip3 vs frequency and temperature
data sheet ? sky73033-11 downconversion mixer skyworks solutions, inc. ? phone [781] 376-3000 ? fax [781] 376-3100 ? sales@skyworksinc.com ? www.skyworksinc.com 200635d ? skyworks proprietary information ? products and product information are subject to change without notice ? sep tember 30, 2009 7 24 25 26 28 23 22 21 20 27 29 30 1710 1735 1760 1785 1810 1835 1860 1885 1910 rf frequency (mhz) iip3 (dbm) C3 dbm 0 dbm +3 dbm figure 9. 1800 mhz and 1900 mhz mixer iip3 vs frequency and lo power 24 25 26 28 23 22 21 20 27 29 30 1920 1930 1940 1950 1960 1970 1980 rf frequency (mhz) iip3 (dbm) C40 o c +25 o c +85 o c figure 11. 2100 mhz mixer iip3 vs frequency and temperature C70 C65 C60 C50 C75 C80 C85 C90 C55 C45 C40 1710 1740 1770 1800 1830 1860 1890 1920 1950 1980 rf frequency (mhz) 2rf C 2 lo (dbc) C40 o c +25 o c +85 o c figure 13. mixer 2rfC2lo vs frequency and temperature C55 C50 C45 C35 C60 C65 C70 C75 C80 C40 C30 C25 C20 1710 1740 1770 1800 1830 1860 1890 1920 1950 1980 rf frequency (mhz) lo to if leakage (dbm) C40 o c +25 o c +85 o c figure 15. mixer lo to if leakage vs frequency and temperature 24 25 26 28 23 22 21 20 27 29 30 1920 1920 1940 1950 1960 1970 1980 rf frequency (mhz) iip3 (dbm) 4.75 v 5.00 v 5.25 v figure 10. 2100 mhz mixer iip3 vs frequency and supply voltage 24 25 26 28 23 22 21 20 27 29 30 1920 1930 1940 1950 1960 1970 1980 rf frequency (mhz) iip3 (dbm) C3 dbm 0 dbm +3 dbm figure 12. 2100 mhz mixer iip3 vs frequency and lo power 50 55 60 70 45 40 35 30 65 75 80 1710 1740 1770 1800 1830 1860 1890 1920 1950 198 0 supply voltage (v) rf to if isolation (db) C40 o c +25 o c +85 o c figure 14. mixer rf to if isolation vs frequency and temperature C70 C60 C50 C30 C80 C90 C100 C40 C20 C10 0 1710 1740 1770 1800 1830 1860 1890 1920 1950 1980 rf frequency (mhz) lo to rf leakage (dbm) C40 o c +25 o c +85 o c figure 16. mixer lo to rf leakage vs frequency and temperature
data sheet ? sky73033-11 downconversion mixer skyworks solutions, inc. ? phone [781] 376-3000 ? fax [781] 376-3100 ? sales@skyworksinc.com ? www.skyworksinc.com 8 september 30, 2009 ? skyworks proprietary information ? products and product information are subject to change without no tice ? 200635d 12 13 14 16 11 10 9 8 15 17 18 1710 1740 1770 1800 1830 1860 1920 1950 1950 1980 rf frequency (mhz) ip1db (dbm) 4.75 v 5.00 v 5.25 v figure 17. mixer ip1db vs frequency and supply voltage 12 13 14 16 11 10 9 8 15 17 18 1710 1740 1770 1800 1830 1860 1890 1920 1950 1980 rf frequency ( mhz ) ip1db (dbm) C3 dbm 0 dbm +3 dbm figure 19. mixer ip1db vs frequency and lo power 11 12 13 15 10 9 8 14 16 17 18 1710 1740 1770 1800 1830 1860 1890 1920 1950 1980 rf frequency ( mhz ) ip1db (dbm) C40 o c +25 o c +85 o c figure 18. mixer ip1db vs frequency and temperature 36 38 40 44 34 32 30 42 46 48 50 1710 1740 1770 1800 1830 1860 1890 1920 1950 1980 rf frequency (mhz) lo-lo isolation (db) C40 o c +25 o c +85 o c figure 20. mixer lo1 to lo2 isolation vs frequency and temperature evaluation board description the sky73033-11 evaluation board is used to test the performance of the sky73033-11 downconversion mixer. an assembly drawing for the evaluation board is shown in figure 21 and the layer detail is provided in figure 22. circuit design configurations the following design considerations are general in nature and must be followed regardless of final use or configuration: 1. paths to ground should be made as short and as low impedance as possible. 2. the ground pad of the sky73033-11 provides critical electrical and thermal functionality. this pad is the main thermal conduit for heat dissipation. since the circuit board acts as the heat sink, it must shunt as much heat as possible from the device. therefore, design the connection to the ground pad to dissipate the maximum heat produced by the circuit board. for more information on soldering the sky73033-11, refer to the package and handling information section of this data sheet. 3. skyworks recommends including external bypass capacitors on the vcc voltage inputs of the device. 4. components l5 and l4 (see figure 23) are high-q, low loss inductors. these inductors must be able to pass currents in excess of 200 ma dc. 5. components r7 and r8 (see figure 23) allow for external adjustment of the if amplifier bias points. to reduce the if amplifier bias current, connect pin 20 to ground through external resistor r8. to increase the if amplifier bias current, connect pin 20 to vcc through external resistor r7. for operation as specified in tables 3 and 4, these resistors are not required. a schematic diagram for the sky73033-11 evaluation board is shown in figure 23.
data sheet ? sky73033-11 downconversion mixer skyworks solutions, inc. ? phone [781] 376-3000 ? fax [781] 376-3100 ? sales@skyworksinc.com ? www.skyworksinc.com 200635d ? skyworks proprietary information ? products and product information are subject to change without notice ? sep tember 30, 2009 9 s1214 j3 j8 j4 j1 j5 j9 note: this evaluation board is used for several different skyworks devices. components c3, c4, c6, c8, c9, c13, c15 through c19, r5, and l3 are not used for the device described by this data sheet. c17 c19 c20 c3 c2 c1 c5 c6 c8 c9 c4 c18 l3 l2 r5 r4 r3 l5 c16 c15 c13 c14 c11 c10 c7 r7 r8 r2 r1 u1 c12 r6 t2 l4 l1 j2 figure 21. sky73033-11 evaluation board assembly diagram
data sheet ? sky73033-11 downconversion mixer skyworks solutions, inc. ? phone [781] 376-3000 ? fax [781] 376-3100 ? sales@skyworksinc.com ? www.skyworksinc.com 10 september 30, 2009 ? skyworks proprietary information ? products and product information are subject to change without n otice ? 200635d s94 0 layer 1: top C metal layer 2: ground layer 3: power plane layer 4: solid ground plane figure 22. sky73033-11 evaluation board layer detail
data sheet ? sky73033-11 downconversion mixer skyworks solutions, inc. ? phone [781] 376-3000 ? fax [781] 376-3100 ? sales@skyworksinc.com ? www.skyworksinc.com 200635d ? skyworks proprietary information ? products and product information are subject to change without notice ? sep tember 30, 2009 11 sky73033 vcc vcc vcc c7 33 pf r2 0 j3 c10 33 pf r3 0 j8 j2 element jumper c5 33 pf c6 12 pf t2 1 2 3 4 6 l4 470 nh l5 470 nh c14 16 pf j5 l2 15 nh r4 0 s948 vcc_ifrf rf n/c gnd gnd vcc_lo n/c vcc_losw lo_sel gnd 15 14 13 12 11 lo2 n/c gnd gnd lo1 1 2 3 4 5 67 8910 rxif if+ ifC gnd n/c 20 19 18 17 16 notes: values for all components are subject to change for matching purposes. some component labels may be different than the corresponding component symbol shown here. component values, however, are accurate as of the date of this data sheet. c1 0 vcc c20 1 f j4 c2 5.6 nh r1 0 r6 0 r8 dni l1 1.3 pf r7 dni figure 23. sky73033-11 evaluation board schematic
data sheet ? sky73033-11 downconversion mixer skyworks solutions, inc. ? phone [781] 376-3000 ? fax [781] 376-3100 ? sales@skyworksinc.com ? www.skyworksinc.com 12 september 30, 2009 ? skyworks proprietary information ? products and product information are subject to change without n otice ? 200635d package dimensions figure 24 shows the package dimensions for the 20-pin mcm, and figure 25 provides the tape and reel dimensions. package and handling information since the device package is sensitive to moisture absorption, it is baked and vacuum packed before shipping. instructions on the shipping container label regarding exposure to moisture after the container seal is broken must be followed. otherwise, problems related to moisture absorption may occur when the part is subjected to high temperature during solder assembly. the sky73033-11 is rated to moisture sensitivity level 3 (msl3) at 260 q c. it can be used for lead or lead-free soldering. for additional information, refer to the skyworks application note, pcb design & smt assembly/rework guidelines for mcm-l packages , document number 101752. care must be taken when attaching this product, whether it is done manually or in a production solder reflow environment. production quantities of this product are shipped in a standard tape and reel format. for packaging details, refer to the skyworks application note, tape and reel information C rf modules , document number 101568. pin 1 indicator 5 5 b c 0.15 a b c side view bottom view top view a 0.1 1.1 0.1 0 a 5x 4.8 0.2 x 0.2 3x r0.2 3 3 5x 4.8 pin 20 pin 1 pin 1 indicator (see detail b) 4x 1.3 4x 0.65 0 4x 1.3 4x 0.65 solder mask opening 20x smt pad 0.2 a b c a b c 0.15 metal pad edge 0.45 0.05 0.3 0.03 0.45 0.1 (0.1) detail a detail b all measurements are in millimeters. dimensioning and tolerancing according to asme y14.5m-1994. solder mask edges s944 figure 24. sky73033-11 20-pin mcm package dimensions
data sheet ? sky73033-11 downconversion mixer skyworks solutions, inc. ? phone [781] 376-3000 ? fax [781] 376-3100 ? sales@skyworksinc.com ? www.skyworksinc.com 200635d ? skyworks proprietary information ? products and product information are subject to change without notice ? sep tember 30, 2009 13 s461 notes: 1. carrier tape: black conductive polystyrene 2. cover tape material: transparent conductive psa 3. cover tape size: 9.3 mm width 4. esd surface resistivity is data sheet ? sky73033-11 downconversion mixer skyworks solutions, inc. ? phone [781] 376-3000 ? fax [781] 376-3100 ? sales@skyworksinc.com ? www.skyworksinc.com 14 september 30, 2009 ? skyworks proprietary information ? products and product information are subject to change without n otice ? 200635d ordering information model name manufacturing part number evaluation kit part number sky73033-11 1700-2200 mhz downconversion mixer sky73033-11 (pb-free package) tw17-d580 copyright ? 2007, 2008, 2009 skyworks solutions, inc. all rights reserved. information in this document is provided in connection with skyworks solutions, inc. (skyworks) products or services. these m aterials, including the information contained herein, are provided by skyworks as a service to its customers and may be used for informational purposes only by the customer. skyworks assumes no res ponsibility for errors or omissions in these materials or the information contained herein. skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other diff iculties arising from any future changes. no license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document . skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of skyworks products, information or mate rials, except as may be prov ided in skyworks terms and conditions of sale. the materials, products and information are provided as is without warranty of any kind, whether express, implied, statutory, or otherwise, including fitness for a particular purpose or use, mercha ntability, performance, quality or non-infringement of any intellectual property right; all su ch warranties are hereby expressly disclaimed. skyworks does not warrant the accuracy or completeness of the information, text, graphics or other items contained within these materials. skyworks shall not be liable for any damages, including but not limited to any special, indirect, incidental, statutory, or consequentia l damages, including without limitation, lost revenues or lost profits that may result from the use of the materials or information, whether or not the recipient of mat erials has been advised of the possibility of such damage. skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the skyworks products could lead to personal injury, death, physical or environmental damage. skyworks customers using or selling skyworks products for use in such applications do so at their own risk and agree to fully indemnify skyworks for any damages resulting from such improper use or sale. customers are responsible for their products and applications using skyworks products, which may deviate from published specifi cations as a result of design defects, errors, or operation of products outside of published parameters or design specifications. customers should include design and operating safeguards to minimize these and other risks. skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of skyworks products outsid e of stated published specifications or parameters. skyworks, the skyworks symbol, and breakthrough simplicity are trademarks or registered trademarks of skyworks solutions, inc ., in the united states and other countries. third-party brands and names are for identification purposes only, and are the property of their respective owners. additional information, includ ing relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference.

▲Up To Search▲

Price & Availability of SKY73033-11-09

	To Download SKY73033-11-09 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .